Wednesday, June 18, 2014

Chalk It Up

"Chalk it up....chalk it up, you'll never stop..."

(Apologies to the Stones. And to anyone who heard me singing that while I worked on this project.)

We posted this picture on Instagram last week:





With the caption, "Consider our tickets for the Chalkboard Bandwagon purchased". 

Well, that was our ticket and this is our souvenir:



Our Awkward Wall is now our Chalk Board Wall!

A few weeks back we asked you guys some "Awkward Questions" and discussed our options for this weird little space. We got some different suggestions, but, ultimately, we just couldn't resist the siren call of the chalkboard paint. I mean, all the cool kids are doing it. 

All the cool kids also have tutorials on how to do it, which is great, so we'll keep the how-to portion of this post brief. 

(The directions on the can are pretty straight forward, as well.)

Essentially, we wiped down the wall with a damp rag (to get rid of any lingering dust or splotches that might keep the paint from adhering) then went over it again with a dry cloth. 




When it was fully dry, we applied the chalkboard paint very thinly with a two inch brush. A small roller would probably have worked well, but we didn't have one on hand and it's such a little space, we didn't feel like it was worth it to go out and purchase one. But if you've got one, great! 

Here's what it looked like after one coat:  





Lookin' good....

Well, maybe not...


The directions say you can recoat in four hours, so that's what we did! We were careful, since we were just using the brush and not a foam roller, to keep our brushstrokes going the same direction, up and down, to avoid overworking the paint and leaving splotchy marks. We also worked from top to bottom, so we weren't leaning against wet paint while we worked on the top. 

And here it is after the second coat: 




Much better. 

We assumed we'd be doing a third coat but, it looked so good after two, we called it done. 

A few things we noticed about the paint itself: it's pretty thin. We were expecting the consistency to be similar to regular house paint, but it was much waterier. Which meant we had to be mindful of not loading up the brush with too much paint so we wouldn't drip. Also, probably because it's so thin, it dries very quickly. The container says it "dries to the touch in 30 minutes" but we noticed it drying while we were still painting, probably less than ten minutes, which is why we were very careful about working in one direction. 

After the second coat was fully dry, it was time to "prep" or "condition" the chalk board. (This makes the board more "eraser-friendly". If you don't condition first, the chalkboard can just kind of soak up the chalk while you're drawing and it much more difficult, sometimes impossible, to fully erase. Conditioning it gives the new, "thirsty" chalkboard something to soak up first and keeps your drawings from "sticking"; almost like oiling a pan.)

Anyway, we grabbed some white chalk (you can use any color, but we thought white was a little less messy.) and, for easier clean up, we threw down an old sheet to catch some of the chalk dust. All you do to condition your chalkboard is rub the chalk aaaallll over it. We did it once vertically:




And once horizontally:



Til we had a beautiful blizzard happening. (It took about two full pieces of chalk.) 



And then took a soft rag (we actually used a dust cloth) and rubbed all that chalk in. 



This was messy. There was lots of chalk dust. It was not enjoyable. 

But it went quickly and the clean up was a breeze (just ball up sheet, throw in washer) and then...




...it was done!

And you know I just had to break it in...



What? Do dishes while my kids nap? Pay some bills? Nah, I'm just gonna doodle over here in the corner. 

And then someone else wanted to test it, as well. 



"This is Saturn," he told me. "And here are it's rings. They go round and round and round and round..."

Yeah, we're having a good time. 

Tuesday, June 17, 2014

Gettin' Sketchy

So, this past month saw my birthday and the inevitable end of my twenties.



*tear* 

Okay,I wasn't really as broken up about that as this picture may lead you to believe. 

When my wife started planning the party, she decided to invite my rather enigmatic friend Mike Q who, I should mention, lives in New York. He was the only out of state guest she invited, mostly because she figured if anyone would respond to a random birthday party invite from a friend several states away it would be him.

As is to be expected for Facebook events, he never sent an RSVP confirming whether or not he would be there. However, in texting back and forth about some unrelated topic he led me to believe that he would not be coming. Bummer, but I figured it was a long shot.

The day of the party arrived and a short while into the party itself I heard someone say, "Is that Mike?"

Skip past the "squeeing", the running outside, the hugs...

While Mike was there we talked about the house a bit and the various things we could do to it. His dad is a contractor and he has quite a bit of insight into that kind of thing (or at least more than I have). Most notably, we discussed the possibility of putting stairs in and finishing the attic.

A couple days later, I get a text message from Mike asking me for my house measurements. No explanation. Once I sent them (which took me way too long because I am a procrastinator and also who knew it took so long to measure a house filled with stuff and kids?) I got an e-mail back with this super cool video:




Obviously there have been some major "tweaks". Some of these we had talked about and some of these were fun additions Mike threw on (like that second peak and the full porch). The stairs were the part that I was excited about. They fit! It can be done! So, whatever we end up doing at least I know that it's an option.

I'm also excited because he included the file so I can play around with it myself. I've downloaded Sketchup (which is what he used to make it) but I haven't had a chance to really mess around yet. Once I get a chance maybe I'll share my experience.

Has anyone else used sketchup? What did you think about it? Or have you ever put in stairs? Want to help?

Friday, June 13, 2014

Five for Friday: Sentimental Sides

One of our very favorite things that has come about, kind of by accident, since we bought this house is this sort of "homeowner camaraderie" with our dads. It's fun to be able to talk shop with them about the various projects we have going on, get their input, borrow their tools, hear about the experiences they went through buying and caring for their homes. I've heard stories I somehow never heard before and we have a whole new appreciation for that side of our dads; you know, that "I'm not hiring someone else to fix my house when by golly I can do it myself" side (and occasionally that "holy cow I'm going to have to hire someone to fix this because it's way over my head" side).

Now, just to be clear, this isn't going to be some weepily poetic ode to fathers (not knocking them though, I've teared up many a time... on second thought let's not go there), this is still a Five for Friday after all. We just wanted to explore some thoughts on gifts for Father's Day that might focus less on the mainstream consumerist mindset and a little bit more on the sentimental side.

So, no ties to add to the collection that never gets worn (my dad hates them... and collars... and top buttons). No cordless drills. No pocket knives. And nothing to add to that little box of pins and coins and unused tie clips on the top of his dresser.

Here's five gifts we think sound pretty cool:


Custom Recipe Art


Alright, so I realize this one won't necessarily work for everyone. For instance if your dad's mom wasn't the homemaker type it might not be terribly meaningful. But maybe she was. Maybe she had some recipe that your dad just loved as a kid or at least brings back fond memories of his childhood. Or maybe your mom has some recipe that she used to cook when your parents were first married. You could get that turned into (or possibly do it yourself) something that could hang on the wall and be enjoyed even when it's not being eaten.


Updated Slides or Home Movies



This is one I've actually done, though I didn't use the above linked company (F.Y.I I have no experience with them, they just came up on a search). I took a brown paper bag of old silent family films to a local shop and had them transfer them all to DVD. It was pretty cool especially since I hadn't seen the footage in over twenty years myself.


Prints of Old Family Photos


via


At places like Staples or Kinkos you can get "engineer prints" (also referred to as blueprint or draft copies) as big as 3'x4' for pretty cheap. Each place seems to price them a little differently but at the largest size the price range seems to be about $5-10. You could simply frame them like that or use them to decorate some other grander item (to give as a gift) like Elsie of A Beautiful Mess at the above link.


Framed Blueprints


via


Did you know that any time a house gets built the builder has to submit a copy of the blueprints when he applies for building permits? Did you also know that you can obtain copies of the same blueprints from the office of public records for a fee? That means that (depending on the age of the house) you could look up blueprints for the house your dad grew up in, the first house your parents bought as a couple, or maybe plans to the house your dad built or had built. Get it framed and you have a pretty awesome, and touching, gift.


Homemade Gifts




Not enough could be said about making something for your dad with your own two hands. Not only is it sentimental because it's custom made by a son or daughter for their dad but it also says, "Look dad, you raised a capable adult human possessing enough skills to provide for themselves" and if that doesn't make a dad proud I don't know what would. I've made a couple things that could make good fatherly gifts (a leather wallet and a leather journal). Meredith's great grandmother made a a quilt out of suits from the men in the family (which is apparently also the type of thing they could donate to a museum one day). To make it even more meaningful pair you could make something tied in with an old keepsake. Like a camera case for an old camera your dad got from his dad. Or you could restore a rusted keepsake pocket knife and make a case for it. Or build a shadow box frame and mount a family heirloom like an antique pocket watch in it. The possibilities are nearly endless.


So, those are just some ideas to get you thinking about some ways to celebrate the holiday in a new and creative way. Happy Father's Day everyone!

Wednesday, June 11, 2014

All Around the House


Ba-bada-ba! Bada-ba-bada-ba-ba!

We are celebrating this week; it is our one year anniversary (what?!) of living in our little blue house. (The above "ba-bada-ba" was my attempt at transcribing a glorious fanfare. Or, maybe a fanfare played by a lone woman on a kazoo.) 

It's a little bit of a shock; it certainly doesn't feel like an entire year has passed. (Wasn't it just yesterday we were picking up our keys and unpacking boxes?) 


Well, in honor of our House-iversary, we would like to invite you to take a walk with us on our Very First (super-awkward, mildly cringe-inducing) House Tour Video! 



Well, actually, that's not quite true. You see, while uploading some pictures the other day, we came across, not one, but two (!!) House Tour videos (well, one's more of a "yard tour") that we shot last year, the day after we closed on this house. 

And, we thought, what the heck, these videos are so incredibly dorky and embarrassing, let's put them on the Internet! And, then, let's make another one and share that, too!

So, that's exactly what we did. 


Some things you'll see in these first two include:

- Our house almost totally empty except for our bedroom, which is where we stored tools. 

- My five-month baby Alice bump. 

- Our backyard nearly bamboo-free. (Oh, but it's still there, it's just waiting...)

- Our front yard, with all of its original trees, bushes, "landscaping rocks" and weeds still intact. 

-  The "Ghost Door".
 







Now that you've seen the previously unreleased "First House Tour", here's this years Updated (but still majorly in progress) House Tour Video: 

 
 
 

Some of the gems included in this new video tour are:

- Just under seven minutes of me talking too fast while trying to recall what we've been working on over the past year. 

- A chair is tripped over. 

- Me, seriously over-using the word "fantastic". 

- Us completely leaving out big chunks of things we've done (i.e. tearing up the walk and the random arrows in Grayson's room). 

For a more in-depth breakdown of every project and tweak, we've also added a House Tour page. Like sand through the hourglass everything else in our lives, the page is still majorly a work in progress, but we'll be updating it regularly so, hopefully, things will be a little more put together over there soon. 

Well, we've definitely got a lot of work ahead of us, but looking back at what we've done so far just makes me feel like, "Yeah, we got this!" Then Joseph and I high-five each other and immediately pretend we didn't just do that.

Sunday, June 8, 2014

Goo (Be)gone!

The people who used to live here were Christmas light enthusiasts.



No, we've never actually met them, but they left us some tell-tale signs: a few nails tacked into the shingles of the roof and these:



Squares that have long ceased to be sticky and are now crusty, yellow splotches roughly the consistency of cement. Or diamonds. 

Now, if we were also Christmas light enthusiasts, this might be okay. We'd nail our own lights to the roof (except we wouldn't, because that's just not a good idea) and cover those crusty squares with our own plastic hooks. But, alas...we are not. 

So these once-useful little tabs are now just...house boogers. 

(Ew, did I really just type that? Should I delete it? Gross.)

But...they are gross! 

We've already lived with them for a year, but this weekend I was over it. They were coming down. By any means necessary. 

We first tried just plain old soap and water. 




Meh. Not a lot happened, as you can tell by my "not impressed" face. 

Then we brought out the bleach (diluted with water). 

Which worked no better than the plain soap and water and smelled much worse. (Does bleach smell like old socks to anyone else? Oh, my goodness, boogers and old socks in one post. My mother is so proud right now.)

Next up, we broke out the Big Guns: Goo Gone. Which smells great, by the way. Mmm, chemicals. 



The way the Goo Gone works ( as it says on the label) is you apply it directly to the, uh, "goo" and then let it sit for " a few minutes" - I left it on for about five - then, using a "clean" "white" rag, you scrub it til it kind of flakes away. They specify "clean" and "white" for a reason, as I learned the first time I tried it. I read "clean" and "white" and thought, "Surely 'dirty' and 'red'  are the same thing."

Well, let me tell you, they are not. 



Whatever removes the "goo" apparently also leaches any color from whatever rag you're using and smears it all over your "was clean a second ago, but now is coated with red-ish grime" surface. 

But, thankfully, a little more Goo Gone (applied with the correctly specified kind of cloth) removes that residue, too. Yay!

So, the Goo Gone worked like a dream on they sticky pads adhered to our vinyl flashing. But...not so well on the ones above our porch, where it's painted aluminum. 



This was after ten minutes of letting it sit and a few more of hard scrubbing. 

It's still the best way we've found to de-sticky pad our house, but it takes a lot of elbow grease. Not that the results aren't totally worth it. 

We've still got a few more hanging around, so if anyone has any suggestions, we'd love to try some other techniques! 

In the meantime, I'm going to go make some cocoa and watch a Chevy Chase movie. Oh, wait, it's 90 degrees outside...make that some lemonade and Blue Hawaii. 

Friday, June 6, 2014

Five for Friday: Art Attack!


Note: So, I said this last week, but I figured it should probably become a "thing" that goes here. (Also, I just really love putting things in italics.) For the record, none of the products/links on any Five for Friday posts are affiliated with us. They are purely things we enjoy (or dream of enjoying one day). 

Our walls have been feeling a little bare. I tend to think of hanging pictures as a final decorating touch; something not to be done until everything else is finished, like adding sprinkles on a cupcake. However, I'm beginning to think that I'm wrong. Or...I've just gotten impatient. I don't want to wait! I want sprinkles now!




So, here are five things that I would love to hang on our walls:



This print from Help Ink:

via


In addition to having really beautiful art, they also donate a portion of each sale to the charity of your choosing. And they print on wood, in addition to high-quality paper, which I think is super cool.



Thiebaud Calendar:


via

Thiebaud prints are kind of hard to find. So, when I came across this calendar on Amazon I was super excited. It's like getting twelve prints for $11, which is a pretty amazing deal. 


Ikea Trees Print:

via


I love the colors in this and it's  fun without feeling too cutesy. Also, it's $12 (!!!).



Etsy Feathers:


via


I mean, who doesn't love feathers? Joseph actually found this one and when he showed me all I said was, "Yes!"



Ali Cavanaugh Print:

via


This last one is on the pricey side ($100 for a 12x12) but her work is just beautiful.   Or maybe I just secretly covet those socks... 


So, yes, I think I'm finally going to get past my "Wait! You can't hang art yet! You're not done! You're not at the sprinkle phase!" way of thinking and order some art! 

Anything you guys can't wait to hang? Or already have up and are loving? Share!

Wednesday, June 4, 2014

Lawnmower Man

So, in preparation for my birthday party this past weekend I got to have a fun little freak out moment adventure definitely out of my usual comfort zone. Due to various busyness/laziness I had skipped mowing the lawn the weekend before so it was looking rough. One night during the week I decided I best get on it and pulled my old lawnmower out. It was a freebie from an uncle who was upgrading but it runs great and he even gave me a new blade since the one he had on it was pretty worn out. Either way, when I went to start it up the starter cord snapped. All I could think was that I was glad I hadn't waited until the last minute since now I had some time to do something about it.

I headed over to Home Depot and picked up a new starter cord for $4. To be honest I'm still kind of surprised they're so cheap. I had to ask an employee where they were because they were on a back end cap, like two aisles away from the lawnmowers.

I started by unhooking the spark plug and removing this plastic cover from the top. It was attached with two screws.




Once I had the cover off it provided a handy-dandy place to keep all of the bolts and screws.




Then I undid the bolts holding the gas tank in place. Once undone it sort of folded down out of the way. The fuel line had to be detached for it to fold completely over (you can see it just above the guard for the discharge shoot) but once it was on its side none of the gas could spill out.




Once that was off I could remove the bolts holding the starter assembly. Here's what it looks like with it off:




One thing I noticed was that when I pulled this part off it took with it the whole pipe (for lack of the technical term) that holds the oil dipstick. It was basically just seated in there with rubber washers and it just popped right out.




Flip over the starter assembly and it looks like this:




Once I had this piece off I wasn't sure how to actually switch out the cord so I just unscrewed the screw in the middle and pulled it out, which was a terrible idea. I heard a *sproing* and this happened:


Noooooooo!


It wasn't the end of the world though. I just wound it back into the spring housing and screwed it back in place. I did have to make sure that the little bent end of the spring caught on a little tab when I set it in but either through sheer dumb luck or because it wasn't that hard I got it on the first try.




Now that everything was disconnected I pulled the new cord out. It said to measure how long it needed to be, add 6 inches for knotting and then cut the excess off but it was already the right size so, yay! It came with a new handle but frankly it looked downright uncomfortable next to the one I already had.


New < Old


The old one was harder to attach than the new one but it really wasn't so bad. I just kind of jammed the cord in as far as it would go and then ended up having to get a pair of tweezers to reach into the handle and pull it through. After knotting the cord that part was done.




Now back to figuring out how to get this thing attached. I realized that if I held the rotating piece in the middle in the right place I should be able to run the cord from the outside right straight through to the other side.




On the directions that came with the new pull cord it said something vague like, "Wind in a counter-clockwise motion until tight. Then unwind one turn." Well, I wound and I wound and it never seemed to get tight. It got tight-er, but how was I to know what was tight enough? So I took a guess, ran the cord through and knotted it.




The package suggested using heat to seal the knot. I didn't have a lighter around so I grabbed a pack of matches and tried using those. Fortunately it was breezy and kept blowing out the matches (I'll explain why that was fortunate in a second) so after about eight of them I gave up.


Nothing but the best Brazilian steakhouse matches for my lawnmower!


Even though I had already tried sealing the knot something told me not to bother putting everything back together or bolting anything on too tight so I loosely bolted the assembly back in place and draped the cord into the little pull-starter rest and stood back.




Yeah, that's definitely too much cord. So I took the assembly back off, untied the knot (thank goodness I couldn't seal it with those matches am I right?), wound it about three or four more times (the slack in the line seemed to be equal to about three or four turns) and put the cord back through. Of course, getting it to go back through was about ten times harder than the first time but I finally got it to go through. Once that was done I rechecked the cord length, threaded it through the top "grate thing", and bolted everything back on.




Ta-Da! Good as new and it started right up.




This was definitely one of those projects that intimidated me a little at the get-go but I didn't have the time or the money to take it somewhere and get it fixed and it ended up being easier than I had anticipated by a long shot.

I apologize to anyone who actually knows a thing or two about lawnmower repair for all of the horrible mislabeling of parts I've probably done and for using terms like "grate thing".


So, have you been pushed out of your comfort zone lately? Did it go smoothly or did you come out with a hilarious story you can pass on to all your friends and family for years to come?