Showing posts with label Tools. Show all posts
Showing posts with label Tools. Show all posts

Wednesday, June 4, 2014

Lawnmower Man

So, in preparation for my birthday party this past weekend I got to have a fun little freak out moment adventure definitely out of my usual comfort zone. Due to various busyness/laziness I had skipped mowing the lawn the weekend before so it was looking rough. One night during the week I decided I best get on it and pulled my old lawnmower out. It was a freebie from an uncle who was upgrading but it runs great and he even gave me a new blade since the one he had on it was pretty worn out. Either way, when I went to start it up the starter cord snapped. All I could think was that I was glad I hadn't waited until the last minute since now I had some time to do something about it.

I headed over to Home Depot and picked up a new starter cord for $4. To be honest I'm still kind of surprised they're so cheap. I had to ask an employee where they were because they were on a back end cap, like two aisles away from the lawnmowers.

I started by unhooking the spark plug and removing this plastic cover from the top. It was attached with two screws.




Once I had the cover off it provided a handy-dandy place to keep all of the bolts and screws.




Then I undid the bolts holding the gas tank in place. Once undone it sort of folded down out of the way. The fuel line had to be detached for it to fold completely over (you can see it just above the guard for the discharge shoot) but once it was on its side none of the gas could spill out.




Once that was off I could remove the bolts holding the starter assembly. Here's what it looks like with it off:




One thing I noticed was that when I pulled this part off it took with it the whole pipe (for lack of the technical term) that holds the oil dipstick. It was basically just seated in there with rubber washers and it just popped right out.




Flip over the starter assembly and it looks like this:




Once I had this piece off I wasn't sure how to actually switch out the cord so I just unscrewed the screw in the middle and pulled it out, which was a terrible idea. I heard a *sproing* and this happened:


Noooooooo!


It wasn't the end of the world though. I just wound it back into the spring housing and screwed it back in place. I did have to make sure that the little bent end of the spring caught on a little tab when I set it in but either through sheer dumb luck or because it wasn't that hard I got it on the first try.




Now that everything was disconnected I pulled the new cord out. It said to measure how long it needed to be, add 6 inches for knotting and then cut the excess off but it was already the right size so, yay! It came with a new handle but frankly it looked downright uncomfortable next to the one I already had.


New < Old


The old one was harder to attach than the new one but it really wasn't so bad. I just kind of jammed the cord in as far as it would go and then ended up having to get a pair of tweezers to reach into the handle and pull it through. After knotting the cord that part was done.




Now back to figuring out how to get this thing attached. I realized that if I held the rotating piece in the middle in the right place I should be able to run the cord from the outside right straight through to the other side.




On the directions that came with the new pull cord it said something vague like, "Wind in a counter-clockwise motion until tight. Then unwind one turn." Well, I wound and I wound and it never seemed to get tight. It got tight-er, but how was I to know what was tight enough? So I took a guess, ran the cord through and knotted it.




The package suggested using heat to seal the knot. I didn't have a lighter around so I grabbed a pack of matches and tried using those. Fortunately it was breezy and kept blowing out the matches (I'll explain why that was fortunate in a second) so after about eight of them I gave up.


Nothing but the best Brazilian steakhouse matches for my lawnmower!


Even though I had already tried sealing the knot something told me not to bother putting everything back together or bolting anything on too tight so I loosely bolted the assembly back in place and draped the cord into the little pull-starter rest and stood back.




Yeah, that's definitely too much cord. So I took the assembly back off, untied the knot (thank goodness I couldn't seal it with those matches am I right?), wound it about three or four more times (the slack in the line seemed to be equal to about three or four turns) and put the cord back through. Of course, getting it to go back through was about ten times harder than the first time but I finally got it to go through. Once that was done I rechecked the cord length, threaded it through the top "grate thing", and bolted everything back on.




Ta-Da! Good as new and it started right up.




This was definitely one of those projects that intimidated me a little at the get-go but I didn't have the time or the money to take it somewhere and get it fixed and it ended up being easier than I had anticipated by a long shot.

I apologize to anyone who actually knows a thing or two about lawnmower repair for all of the horrible mislabeling of parts I've probably done and for using terms like "grate thing".


So, have you been pushed out of your comfort zone lately? Did it go smoothly or did you come out with a hilarious story you can pass on to all your friends and family for years to come?

Tuesday, May 6, 2014

The Tools of the Trade

Tools. Can't live without 'em. Can't have enough of 'em.

It's certainly not news to anybody, but being a homeowner often means doing repairs yourself because it's stupid expensive to have someone else do them. Anyone can enjoy owning and using tools, but most renters have the distinct advantage of an on-call serviceman who comes with his own tools. (One of the things we loved about apartment living, especially when we found mold creeping out from behind our medicine cabinet. "Um, hello, Building Repair Man? Come help us!) On the other hand, I have the distinct advantage of being able to convince my wife that I need more tools, you know, "for the house", so yeah.

Either way, we've been home owners for close to a year now, so I feel like this is a good time to talk about some tools that have come in handy for us, some tools that I believe I'll need for future work and the reasons for both. Then I might do a little poll to find out what your favorite tools are, or what you find most useful to own. So, without further ado, and in the order they occur to me, here are the tools I've found useful to own:


  • A Hatchet and/or Machete - $10-20 each

This hatchet in particular is more like $40, but it's soooo pretty.
 
 



These two might seem odd to some, and indeed might not be useful to everyone, but we have this:




I have used these both for their intended purposes and also found other uses for them. For instance, I've used the hatchet to chop down bamboo but I've also used the machete to pry big pieces of slate out of the ground. Sure that seems like the job for a shovel but I didn't have one at the time and the slate wasn't totally buried. If you're looking at a house with some out of control underbrush these two will come in handy and neither is that expensive.



  • A Hammer and Screwdrivers - $10-30 and $1-20 respectively




These two are pretty self-explanatory and probably don't warrant much time or explanation.  If you want to hang any pictures in your house, you need a hammer. You don't need anything big or fancy, just an inexpensive claw hammer (as opposed to his slightly less useful brother: the ball-peen hammer.) If you plan on changing your doorknobs, you'll need a screwdriver and if you want to paint it's much neater to remove switch plates than to tape them. You don't need a large assortment, I'd suggest a small and large in both Phillips head and flat head (which you can buy individually or in a set) or even an all in one like the one pictured.

Also, I feel like these aren't strictly necessary so they won't get their own section, but if you're hanging things, a tape measure and a level are always useful.



  • A Saw - $10-25



I have a circular saw, a coping saw, a standard handsaw, and a convertible hack/bow saw. All were gifts, which was incredibly fortunate.  Just having a basic hand saw is probably fine, it's pretty versatile.  I've used them on the boards for the mulch beds against the front of the house, the closet shelves, branches/trees, our board & batten, and various other small projects.



  • Painting Supplies - $10-20 (depending how you buy it)




Obvious. If you're like us, then painting is essential to making a house feel like a home. Not being able to paint our apartment aggravated Meredith to no end and so, naturally, as soon as we bought our house, painting was immediately one of the top priorities. So far we've painted everything except the master closet. Yep, that's right. We don't waste time when it comes to painting. (Though why we've neglected that closet is a mystery. )


  • Lawnmower - $140-?




If you have any yard at all this is essential. We went a while before getting one and boy was it difficult to reclaim the yard. Of course we waited because we knew my uncle was getting a new lawnmower and he said we could have his old one, so waiting and fighting the lawn was definitely worth it for a free lawnmower. Also, the difficulty was mostly due to the fact that our yard is full of more than just grass. I'd love to be able to try one of those reel lawn mowers but I don't think it would cut it in our yard.


  • A Cordless Drill - $70-?


 

I went far too long without this. I think I just kept borrowing one. Now that I have one I'm like, wait how did I survive without this? And, honestly, I'm not sure. There are plenty of things you can accomplish without a drill but, seriously, just get one. You will feel so much more capable. 


  • A Shovel - $6-40


 

This is another one that I kept borrowing but have finally acquired for myself. If you plan on doing any type of landscaping you have to have a shovel. They have all kinds of different types but personally I subscribe to the thinking that the only difference is if it's short or long. I guess if I had to choose I'd prefer a round edge but seriously, I don't care if it's a "transfer shovel", a "digging shovel", a "spade", fiberglass or wood handled, with or without a rubber grip, etc. And how the heck can you have a "square point" shovel anyway? Seriously, read the tags at the store. They're ridiculously specific. 


  • Rakes - $7-25



 

I like leaf rakes and bow rakes. They're both very useful. I've been borrowing some since my father-in-law has extras and these have been lower on the "fun tools" list. Well, let's be honest, they're not really on the "fun tools" list at all. Either way they have still been absolutely necessary for our yard (but will hopefully be less so now that we have significantly fewer trees). 

I think that ended up being long enough that I might make the list of tools I think would be fun useful to own a separate post. So, what tools have you found to be absolutely essential to surviving the rigors of home ownership? Have I forgotten something incredibly important?


(Most of these pictures were borrowed. I am in no way making money off of this, nor am I recommending these specific brands. In some cases they're not even the brand I own. They're used merely as tool examples.)